Dennis, if you did this underwater where you sail, isn't that like trolling for
alligators???RonWild CheriC&C 30-1STL
From: Dennis C. via CnC-List <cnc-list@cnc-list.com>
To: CnClist <cnc-list@cnc-list.com>
Cc: Dennis C. <capt...@gmail.com>
Sent: Tuesday, March 15, 2016 9:33 PM
Subject: Re: Stus-List Mertec folding prop removal
I removed mine underwater with the method below.
Insert a 3/8" extension in the square hole in the prop nut. Attach a ratchet
or handle. Twist it counterclockwise. The Cotter key through the hub and prop
nut will shear and the nut will come out. After that, a gear puller should
remove the hub. Once the hub and nut are off, remove all of the sheared pieces
of the key with a small punch.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
