No way I'm dragging 2 group 27s in and out of the dink every time I go out.   
Wouldn't be long before one ended up in the drink. ..  lol
Danny


Sent from my T-Mobile 4G LTE Device-------- Original message --------From: 
"Dennis C. via CnC-List" <cnc-list@cnc-list.com> Date: 2/27/2016  4:19 PM  
(GMT-05:00) To: cnc-list@cnc-list.com Cc: "Dennis C." <capt...@gmail.com> 
Subject: Re: Stus-List Stus-list: portable generator on sale at harbor  freight 
Buy 2 extra batteries, take them home, charge them, swap them out.  Repeat.  
Half the price of the generator.
Dennis C.
On Feb 27, 2016 10:08 AM, "Danny Haughey via CnC-List" <cnc-list@cnc-list.com> 
wrote:
Well,  I'm mostly interested in a way of keeping batteries typed up.   I'll be 
keeping the boat on a mooring.   Ideally I'd install a properly designed solar 
charging system but I'm trying to kick that can down the road. 
Danny


Sent from my T-Mobile 4G LTE Device-------- Original message --------From: Ken 
Heaton via CnC-List <cnc-list@cnc-list.com> Date: 2/27/2016  11:22 AM  
(GMT-05:00) To: cnc-list <cnc-list@cnc-list.com> Cc: Ken Heaton 
<kenhea...@gmail.com> Subject: Re: Stus-List Stus-list: portable generator on 
sale at harbor      freight 
As Josh stated, it is not the same as a marinized, built in diesel genset.  But 
it is only $400.00
It really depends on what you want to do with it.
Run your AC?  I don't think so.  Charge your batteries through your onboard 
battery charger as you are away from shore power?  Yes, it will do that.  Run a 
few power tools while you are doing some work on the boat at a mooring or at 
anchor?  Yes, it will do that too.
Honda was the first to make these small inverter generators and theirs are 
reasonably quiet, though you probably won't make any friends running this in a 
silent anchorage at night.  If you have to sit i on deck you will find it 
noisier below that above as the deck is like a soundboard.  If you can leave it 
on the dock while it is running you will likely find it to be quiet.
This one does seem to output 12 DC, 8 amps, directly.  Look at the photos on 
the website.
What did you want to do with it / use it for?
Ken H.
On 27 February 2016 at 12:07, Josh Muckley via CnC-List <cnc-list@cnc-list.com> 
wrote:
I have a similar one.  They work.  They are also loud and use gasoline instead 
of diesel.  It's a pull start only.  They don't offer a 12v output.  They are 
not marinized, flame arrested or corrosion proof/resistant to the level needed 
for long term marine use.  They are also air cooled and exhaust to the air 
which means absolutely no inside use unlike a properly installed marine 
generator.  2200 running watts is likely to be 10amps @ 220v or 20 amps at 
110v.  Not likely to be on par with your shore power.  You may struggle if 
running HVAC. 
Josh Muckley

S/V Sea Hawk

1989 C&C 37+

Solomons, MD
On Feb 27, 2016 10:34 AM, "Danny Haughey via CnC-List" <cnc-list@cnc-list.com> 
wrote:
Hi guys, Just saw an ad in my email this generator

2500 Peak/2200 Running Watts, 4.7 HP (125cc) Portable Inverter Generator EPA III
Is on sale for $399 with coupon code. 
Anyone have any thoughts on it? 
Danny
Sent from my T-Mobile 4G LTE Device
_______________________________________________



Email address:

CnC-List@cnc-list.com

To change your list preferences, including unsubscribing -- go to the bottom of 
page at:

http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com






_______________________________________________



Email address:

CnC-List@cnc-list.com

To change your list preferences, including unsubscribing -- go to the bottom of 
page at:

http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com







_______________________________________________



Email address:

CnC-List@cnc-list.com

To change your list preferences, including unsubscribing -- go to the bottom of 
page at:

http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com





_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to