I can confirm that 1/2-inch is the correct diameter seal for A&H hatches. I replaced mine about a year ago. Originally I ordered 5/8-inch diameter from A&H thinking bigger is better but I couldn't close the hatch with 5/8-inch seals. 3/8-inch is definitely too small.
Bob Boyer Sent from my iPhone, Bob Boyer > On Feb 17, 2016, at 10:05 PM, Bill Coleman via CnC-List > <cnc-list@cnc-list.com> wrote: > > Measure twice cut once. And yes I do mean half inch, and I think it was a CH > more. Or less. Now I'll have to pull that out and measure it again because I > know it was around a half an inch, certainly not 3/8. > > > > Bill Coleman > > > -------- Original message -------- > From: Dreuge <dre...@gmail.com> > Date: 2/17/2016 8:23 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Bill Coleman <colt...@verizon.net> > Subject: Re: Stus-List Landfall 38 Atkins & Hoyle hatch seals > > Bummer, I placed the order this afternoon for the 3/8-in so I could get the > material for the weekend. For the larger hatches, since 3/8 is about > 10mm, Is it possible that you mean around 1/2-in? > > Thanks. > > - > Paul E. > 1981 C&C 38 Landfall > S/V Johanna Rose > Carrabelle, FL > > http://svjohannarose.blogspot.com/ > >> On Feb 17, 2016, at 3:36 PM, Bill Coleman <colt...@verizon.net> wrote: >> >> I have a roll of 3/8, I could send you some for shipping. >> I have the larger Atkins Hatch, the cord for that seems to be around 10 mm. >> I don’t have a roll of that. >> >> Bill Coleman >> C&C 39 Erie, PA<image001.gif> >> >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dreuge >> via CnC-List >> Sent: Wednesday, February 17, 2016 11:25 AM >> To: cnc-list@cnc-list.com >> Cc: Dreuge >> Subject: Stus-List Landfall 38 Atkins & Hoyle hatch seals >> >> Hi, >> >> I know the small (galley and head) Atkins and Hoyle hatches use 3/8-in EDPM >> foam cord for replacement seal. >> >> Does anyone know what the replacement seals are for the other larger Atkins >> and Hoyle hatches? Do they use the same 3/8-in EDPM foam cord or is it a >> different size and/or type? >> >> >> I am planning on ordering some 3/8-in EDPM foam cord from McMaster-carr. >> Minimum order length is 100-ft but the price is far better than buying from >> A&H. If anyone is interested in some 3/8-in EDPM let me know. I’ll sell >> 25-ft length for $10 each plus shipping. >> >> >> I came across this interesting dig at A&H on the BoatUS site: >> http://www.boatus.com/cruising/littlegidding/200305-29.asp >> After reading it, I order a some Silaprene online from JD >> Industrial for $8.79. >> >> >> - >> Paul E. >> 1981 C&C 38 Landfall >> S/V Johanna Rose >> Carrabelle, FL >> >> http://svjohannarose.blogspot.com/ > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
