On my 25, I installed a bilge pump in the sump, and connected it to the old refrigirator line, which was long gone but the remainders of the manual pump and the line was still there, running to the transom. Ahmet
On Thu, Jan 21, 2016 at 1:28 PM, Marek Dziedzic (hotmail) via CnC-List < cnc-list@cnc-list.com> wrote: > Alex, > > on my old C&C 24 I had a manual pump that was installed on a piece of > plywood dimensioned so that it would fit as a replacement to the first step > up the companion way. One could imagine a similar arrangement for a > electric pump. > > In my case, we were storing that pump in the “head” area, where it was > very much out of the way. > > If this does not suit you, you could try running the hose on the starboard > side (under the navigation table) or on the port side (under the head) to > the aft part of the boat (I don’t think you could call that part just a > locker) and install the pump and discharge hose there. > > Just a thought > > Marek > C270, “Legato” > ex. C&C 24 “Fennel” > Ottawa, ON > > *From:* Alex Wolfe via CnC-List <cnc-list@cnc-list.com> > *Sent:* Thursday, January 21, 2016 13:14 > *To:* cnc-list@cnc-list.com > *Cc:* Alex Wolfe <mambome...@yahoo.com> > *Subject:* Stus-List Installing a bilge pump in a C&C 24 > > Greetings, > > I have been thinking about installing a Rule bilge pump as a companion to > the existing original manual pump. There is not much room and I am > reluctant to start cutting holes in the cabin floor. The issue is where to > route the hose. Have any of you done this on a 24 or 25? > > I am leaning towards a mobile installation that I could deploy to the > bilge or keep coiled under the sink when not in use, but this is not the > most graceful solution. > > As always, your wisdom is appreciated. > > Regards, > > Alex > > Alex Wolfe > Shaka, C&C 24 > Coconut Grove Sailing Club > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
