Used 3/16 black acrylic, wet sanded with 400 grit to a matte finish. Looks
good. Brother p-touch to label panel, and wires also with special labels.
Labelled and routed all wires and secured with cable ties. Replaced my analog
voltmeter with victonix battery monitor. Fits existing hole
Dave
Message: 1
Date: Tue, 12 Jan 2016 19:28:34 -0400
From: Graham Collins <cnclistforw...@hotmail.com>
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Refinish/repaint breaker panels?
Message-ID: <blu436-smtp193b14f4343db955aba362ed8...@phx.gbl>
Content-Type: text/plain; charset="windows-1252"; Format="flowed"
Hi Joel
I had to replace my AC panel, at some point it had a meter in it which
had died and been torn out, looked bad. And I wanted to fit a VHF
adjacent. So I had 2 rectangles cut and I drilled as required, and
painted with black "hammered finish" spray - looks great. And when I
later replaced the panel above it I could easily paint to match.
Paneltronics will let you pick the exact labels you want and just buy
them, so you don't end up with labels for "trim tab" and "annoyingly
loud stereo"...
Graham Collins
Sent from my iPhone
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
