IIRC, my ground wire is quite large as well. The wire is terminated with a ring which is secured on one of the 5 mounting screws. Not that it is needed but under the same screw is a 14 gauge wire jumper that has a ring terminal on one side and a female disconnect on the other so that it can attach to the spade of the sender. A stock photo of my sender is attached.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Jan 4, 2016 7:33 PM, "Bev Parslow via CnC-List" <cnc-list@cnc-list.com> wrote: > On the 29-2 the wire for the fuel indicator has a 14-16 gauge pink to the > centre of the sender unit and then a much thicker gauge (6 or 8) going to > the central mount on the tank. This heavier gauge needs to go onto a male > prong on the other side of the sender. I cannot find a female fitting that > fits this thick wire. Can I just chuck it and put in a 14-16 instead. Hope > this is coherent! > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
