Mike, Had the pole and it was ungainly looking. Replaced it with a Questus gimball mount and love it.
David F. Risch 1981 40-2 (401) 419-4650 (cell) Date: Tue, 29 Dec 2015 14:51:04 -0500 To: cnc-list@cnc-list.com Subject: Re: Stus-List Stus List - Raymarine Combo on sale again From: cnc-list@cnc-list.com CC: csgilchr...@comcast.net Mike,My experience with mast mounted radar is not favorable. Close in targets tend to drop off (such as small boats and channel markers in the fog) as the radar tends to see above those objects. The mast mount is also hell on an overlapping jib..Chuck Gilchrest Sent from my iPhone On Dec 29, 2015, at 2:23 PM, Headgorilla via CnC-List <cnc-list@cnc-list.com> wrote: Thanks for discussing the Raymarine equipment, I am going into the NY boat show next week to see my electronics people and probably but a package due to all the rebates and discounts they offer, so I appreciate your experience on this subject....I am listening. One Question: where the best spot to mount the Radar antenna, on the Mast? or off a pole on the stern? Mike Dolan 1979 34' C&C "Skywalker" Southold, NY -----Original Message----- From: Chuck Gilchrest via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Chuck Gilchrest <csgilchr...@comcast.net> Sent: Tue, Dec 29, 2015 2:15 pm Subject: Re: Stus-List Stus List - Raymarine Combo on sale again I believe the C series units also rely on NMEA 0183 networking language where A, E series and newer will be NMEA 2000 and can network more readily with peripherals such as wind, speed, depth, and autopilot. I’d check to see what’s on your boat with regards to the peripherals and that may make a difference in your decision making process. Don’t try to mix and match instrument brands or operating language otherwise you will spend all your sailing time trying to make the instruments talk to each other and at best, functionality will be limited. Chuck Gilchrest S/V Half Magic 1975 25 Mk 1 S/V Orion 1983 35 Landfall Padanaram, MA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Tuesday, December 29, 2015 1:03 PM To: cnc-list@cnc-list.com Cc: Frederick G Street <f...@postaudio.net> Subject: Re: Stus-List Stus List - Raymarine Combo on sale again Sure! The eS Series is the newest MFD from Raymarine, and is basically an updated, more powerful version of the e Series, with both touchscreen and hard controls. I would definitely recommend the eS over the e if you’re looking to buy today, particularly at the 7” size where there’s not much difference at all in price. The Raymarine c Series has NO touchscreen capability whatsoever; just buttons. I’d put it at the bottom of the heap in terms of power and functionality. How’s that? :^) Happy New Year, all! — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Dec 29, 2015, at 11:22 AM, Tim Goodyear <timg...@gmail.com> wrote: Fred, thank you for that summary - I've been trying to work out what the differences between the Raymarine models amount to in the real world. Would you care to expand your descriptions to include the "c" and "es" ranges too? Thanks! Tim _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com This email has been sent from a virus-free computer protected by Avast. www.avast.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
