turns out the info is on Raymarine's website, who would have thought?!! ;)
"The transducers above may be used with ST40, i40, i50 and ST60+ displays (as repeaters only) on the SeaTalk1 network via a SeaTalk to SeaTalkng convertor (right). Please note that ST40/i40/i50 and ST60+ displays will only work as repeaters if used with the above transducers. You cannot calibrate the transducers from these instruments. For calibration you would require a following SeaTalkng instrument: ST70, ST70+ or i70 display in your network." Sounds like it'll work, but not really. How big of a deal is this? I want new instruments anyway but new instruments don't come with a smart transducer like this and I want to get rid of the existing depth without drilling another hole or going through-the-hull like it is now. Thanks, Steve Suhana, C&C 32 Toronto On Tue, Dec 1, 2015 at 8:22 AM, Stevan Plavsa via CnC-List < cnc-list@cnc-list.com> wrote: > Hi All, > > I'm assuming that these are both just airmar transducers: > > Garmin: > > http://ca.binnacle.com/p7849/GARMIN-TRANSDUCER-DST800-SPD/TEMP/DEPTH-NMEA2000/product_info.html > > Raymarine: > > http://ca.binnacle.com/p8942/RAYMARINE-TRANSDUCER-RETRACTABLE-TRIDUCER-ST-NG-DST800-(ST70/i70)/product_info.html > > I have Raymarine ST40 for depth and speed and want to replace the > paddlewheel I have with this one so I can get rid of the internally mounted > depth sounder, which has always been flakey. I'm under the impression that > this one will work but would appreciate verification (or not!). > > Thanks, > Steve > Suhana, C&C 32 > Toronto > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
