Hi terry, Could not see a link to the pic, but send me one directly if you wish.
My 33ii has no such fitting downstream of the pressure water pump, and my plumbing looks to be original. It may be that a PO installed that (it sounds like a check valve) to keep the pump from cycling as the downstream side lost pressure. The system works but can be a bit quirky. You may not need the broken part. Fwiw the pump on my 33ii is a flojet 4405. http://www.defender.com/product3.jsp?path=-1%7C51%7C2234226%7C2234231&id=151034 Dave Sent from my iPad > > ------------------------------ > > Message: 7 > Date: Fri, 30 Oct 2015 16:27:51 -0900 > From: Josh Muckley <muckl...@gmail.com> > To: "C&C List" <cnc-list@cnc-list.com> > Subject: Re: Stus-List plumbing problem > Message-ID: > <CA+zaCRA-mkV8=D1N=-xqx2yxmqwxx7v3yzhnepofkpkb24h...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hey Terry, > > Sounds like you're new to the list. Welcome. The plumbing systems on our > boats are varied in nature and not particularly C&C specific. Your best > bet is to get the pump specifics (make, model, serial) and look for a > discharge check valve part from the manufacturer. If you don't have any > luck get back to us with the specs and maybe we will be more lucky. > > Warm regards, > > Josh Muckley > S /V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Oct 30, 2015 9:05 PM, "Terry Pearson via CnC-List" <cnc-list@cnc-list.com> > wrote: > >> >> >> Hello all, first, I own a 1986 C&C 33 MK2, while winterizing my boat, I >> found a water leak on the discharge side of my potable water pump. The >> fitting between the pump and the elbow was cracked. I tried to unscrew the >> fitting and the theads snapped off in the pump housing. i haven?t tried >> yet, but am pretty certain I can use an ease out to get the remaining >> treads out of the pump. The problem I am having is I can not find the >> replacement part, or even know what it is called. Its a a white plastic >> fitting, male threads on both ends with a ball check valve built into the >> fitting. any help would be greatly appreciated. >> >> >> Terry Pearson >> >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20151030/fc4dfe74/attachment-0001.html> > > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
