And I have 2 30 amp circuits (although I only use one) and the cheap one can handle both.
I don't mind the neighbors eating my zinc, it is the Max-Prop that is off the menu! Joel On Tue, Oct 27, 2015 at 1:39 PM, Della Barba, Joe via CnC-List < [email protected]> wrote: > My Quicksilver and this one ( > http://www.defender.com/product.jsp?path=-1|328|2290032&id=1118395) have > the ABYC required failsafe capacitors. The cheap one does not appear to > meet this standard. > > Joe > > Coquina > > > > *From:* CnC-List [mailto:[email protected]] *On Behalf Of *ed > vanderkruk via CnC-List > *Sent:* Tuesday, October 27, 2015 1:20 PM > *To:* [email protected] > *Cc:* ed vanderkruk > *Subject:* Re: Stus-List Galvanic isolator - Good idea? > > > > I put one in when I refurbished my A/C electrical side. > > It isolates you from your neighbors which might slow down the zinc > consumption ... unless of course it is issues on your own boat causing you > problems. > > Many surveyors would recommend one if you are in a marina with shore > power. > > The particular one you have listed doesn't seem to be a 'fail safe' model > as the others in the same catalog category. Which is why they mention a > remote monitor being required. > > Ed > > On Oct 27, 2015 12:48 PM, "Joel Aronson via CnC-List" < > [email protected]> wrote: > > Does anyone use one of these: > > > > http://www.defender.com/product3.jsp?path=-1|328|2290032&id=605562 > > > > Does it slow/stop electrolysis? Most of the boats on my dock are plugged > in, and I go through a zinc or two a year. > > > > Will an isolater do anything besides lighten my wallet? > > > > -- > > Joel > 301 541 8551 > > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > [email protected] > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ Email address: [email protected] To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
