I think the propane is a Lehr. Luhrs made awful powerboats. FWIW, Fawcetts in Annapolis a/k/a PYacht dropped them due to service/reliablity issues.
Joel 35/3 Annapolis On Mon, Oct 26, 2015 at 1:24 PM, Charlie Nelson via CnC-List < cnc-list@cnc-list.com> wrote: > I suggest the used route unless you plan to use the dinghy a lot. > > If you decide on new, I'd consider the propane powered Luhrs (sp?) at > about $1000-light and no fuel hassles. > > Charlie Nelson > > cenel...@aol.com > > > -----Original Message----- > From: David via CnC-List <cnc-list@cnc-list.com> > To: CNC CNC <cnc-list@cnc-list.com> > Cc: David <davidrisc...@msn.com> > Sent: Mon, Oct 26, 2015 1:07 pm > Subject: Re: Stus-List outboard size > > Pick up a used 2 stroke. My 4hp Yamaha starts all the time and is much > lighter than the comparable 4 stroke and powers the high pressure floored > Avon just fine. I do own a 4 stroke 8hp, but she sits on the RIB and > never moves. Damn thing weighs a ton. The RIB is great locally but needs > the additional horsepower. > > David F. Risch > (401) 419-4650 (cell) > > > ------------------------------ > Date: Mon, 26 Oct 2015 09:32:01 -0700 > To: cnc-list@cnc-list.com > Subject: Stus-List outboard size > From: cnc-list@cnc-list.com > CC: jones.mi...@gmail.com > > Ls and Gs > > Can you help me? I have recently bought an 8ft inflatable as tender and am > looking at second hand outboard options. Can you advise me of adequate size > required? Specifically I have seen a 2,2 hp advertised. Will that be enough > to potter to the dock and back? The safety sticker on the boat says up to > 5hp but that seeems a bit much and heavy. > > Thanks and regards > > Mike Jones > Seanachai, 1981 C&C 34 > Victoria > > _______________________________________________ Email address: > CnC-List@cnc-list.com To change your list preferences, including > unsubscribing -- go to the bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > > Email > address:CnC-List@cnc-list.com > To change your list preferences, including > unsubscribing -- go to the bottom of page > at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
