any pictures?
jim
sea ya!
lf38
-----Original Message-----
From: svpegasu...@gmail.com via CnC-List <cnc-list@cnc-list.com>
To: cnc-list <cnc-list@cnc-list.com>
Cc: svpegasus38 <svpegasu...@gmail.com>
Sent: Wed, Oct 14, 2015 9:48 pm
Subject: Re: Stus-List Dodger for 34+
I just got a new dodger, the front window zips out or swings up and hangs from
snaps on the bottom side of the dodger top. Thinking of doing the same to the
transition panel between dodger and bimini.
Doug Mountjoy
svPegasus
LF38
just west of Ballard, WA.
------ Original message------
From: Robert Boyer via CnC-List
Date: Wed, Oct 14, 2015 14:02
To: cnc-list@cnc-list.com;
Cc: Robert Boyer;
Subject:Re: Stus-List Dodger for 34+
My latest revision to my dodger was to make the front window zip out & able to
be completely removed--this eliminates the hassle of rolling it up.
Bob
Bob Boyer
S/V Rainy Days / Annapolis MD
1983 C&C Landfall 38 - Hull #230
email: dainyr...@icloud.com
blog: dainyrays.blogspot.com
"There is nothing--absolutely nothing--half so much worth doing as simply
messing about in boats." --Kenneth Grahame
On Oct 14, 2015, at 4:55 PM, Syerdave--- via CnC-List <cnc-list@cnc-list.com>
wrote:
https://picasaweb.google.com/113820107769936378062/Windstar2#6021225444699983090
Am fairly happy with this dodger profile on my 33ii. Make sure you set the
height so that any helmsmen can see over or under the frame. The Handrails on
the side are very useful. The bimini design is good, with the exception that
you cannot see the masthead from the helm. It keeps the rain and sun off.
Strangely, the PO had put a window in the connector piece, between the dodger
and bimini, which cannot be used under sail due to the cockpit traveller.
Also, when the traveller is off to one side, and the sheets are eased, they
foul the side of the dodger. I have "running dodger stays" where I slack the
one side when the situation occurs.
We like to sail with the dodger window open - better to see. Make sure you
canvas maker facilitates being able to fast en the window to the top of the
dodger, rather than loosely rolled up in the opening, blocking view. I have a
short winch handle that allows me to use the cabin top winches.
Dave
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email
address:
CnC-List@cnc-list.com
To change your list preferences, including
unsubscribing -- go to the bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
