BTW, for those contemplating varnishing interior teak, there are lots of pieces that can be removed and taken home for working on.
On some C&C models, the frames around the sliding storages above the settee and dinette are "C" molding with slots routed for the slides. You first need to remove the "key" piece. The key piece has one side of the "C" missing so it is now an "L" molding. That is usually the top piece. You can verify that by feeling the back side of each piece to find the one that is the "L" piece. Once you find it, look in the slide slots for the heads of small brads. There should be 2-4 brads. Use a pair of needle nose pliers to pull out the brads. Save them. Once you remove the brads, the key piece should pull straight out. Now remove the brads from the side pieces. They will tilt inward and you can remove them. The bottom piece will lift straight up. To re-install, simply reverse the procedure. Set the brads with a nail set. The frames around the cabinet doors are fastened from the inside with square drive fasteners. Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
