The glue was blood red on a white panel, so I ended up having my sailmaker cut out a 36 x 60 inch panel and sewing in a clean panel for the new numbers. Given how little I paid for the chute, I'm way ahead!
Joel On Tue, Sep 8, 2015 at 1:58 PM, Jim Watts via CnC-List < cnc-list@cnc-list.com> wrote: > Goof Off does a good job of the residue and didn't seem to hurt my spin in > any way. > Do it outside unless you *like* feeling woozy.. > > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > > On 7 September 2015 at 16:15, Kurt Heckert via CnC-List < > cnc-list@cnc-list.com> wrote: > >> My sail loft recommends MEK to remove the residue. >> >> Kurt Heckert >> C&C 35 mk II >> Heart & Soul >> >> ------------------------------ >> * From: * Joel Aronson via CnC-List <cnc-list@cnc-list.com>; >> * To: * cnc-list@cnc-list.com <cnc-list@cnc-list.com>; >> * Cc: * Joel Aronson <joel.aron...@gmail.com>; >> * Subject: * Re: Stus-List removing sail numbers/residue >> * Sent: * Mon, Sep 7, 2015 12:01:42 AM >> >> Thanks >> >> On Sunday, September 6, 2015, Andrew Burton via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> If it's a good chute, you may want to avoid harsh chemicals. Sailmakers >>> I know just sprinkle baby powder on the old glue, as Dennis says. >>> >>> Andy >>> C&C 40 >>> Peregrine >>> >>> Andrew Burton >>> 61 W Narragansett >>> Newport, RI >>> USA 02840 >>> >>> andrewburtonyachtservices >>> <http://sites.google.com/site/andrewburtonyachtservices/> >>> +401 965-5260 >>> >>> On Sep 6, 2015, at 17:05, Dennis C. via CnC-List <cnc-list@cnc-list.com> >>> wrote: >>> >>> Not sure. Probably 3M Adhesive remover. Check with your sail maker. >>> >>> I just sprinkled baby powder on the residue on one of mine. Problem >>> solved! >>> >>> Dennis C. >>> >>> On Sun, Sep 6, 2015 at 3:43 PM, Joel Aronson via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> All, >>>> >>>> Just got a nearly new chute off Ebay for next to nothing. When I >>>> remove the numbers there is residue on the sail. What will safely clean up >>>> the glue? >>>> >>>> Joel >>>> 35/3 >>>> Annapolis >>>> >>>> >>>> -- >>>> Joel >>>> 301 541 8551 >>>> >>>> _______________________________________________ >>>> >>>> Email address: >>>> CnC-List@cnc-list.com >>>> To change your list preferences, including unsubscribing -- go to the >>>> bottom of page at: >>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>>> >>>> >>>> >>> _______________________________________________ >>> >>> Email address: >>> CnC-List@cnc-list.com >>> To change your list preferences, including unsubscribing -- go to the >>> bottom of page at: >>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >>> >>> >>> >> >> -- >> Joel >> 301 541 8551 >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
