Jerome:
Thank you for bringing reason, logic and the COLREGS Rules to this
discussion...again, thank you.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2015-08-24 5:12 PM, Jerome Tauber via CnC-List wrote:
Strobes are illegal technically even in emergencies. See the COLREGS
(Rules 20, 21, & 36- Rule 36 Signals to Attract Attention If necessary
to attract the attention of another vessel, any vessel may make light
or sound signals that cannot be mistaken for any signal authorized
elsewhere in these Rules, or may direct the beam of her searchlight in
the direction of the danger, in such a way as not to embarrass any
vessel. Any light to attract the attention of another vessel shall be
such that it cannot be mistaken for any aid to navigation. For the
purpose of this Rule the use of high intensity intermittent or
revolving lights, such as strobe lights, shall be avoided.
Sent from my iPhone
On Aug 24, 2015, at 3:58 PM, Bill Coleman via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
My original masthead light WAS a strobe. No solid, no nothing.
Screwed up my VHF reception. Not sure why those were ever used . . .
Bill Coleman
C&C 39 Erie PA.
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*David Donnelly via CnC-List
*Sent:* Monday, August 24, 2015 3:34 PM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* David Donnelly
*Subject:* Re: Stus-List ...Now lighting configurations...
My anchor light I installed last year has a strobe setting. You
control it with on / off sequence of the switch..
David Donnelly
C&C 26 Mistress
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
