I had a new prop shaft made recently by this shop in Ontario. Here is the
quotation details and contact info. The lenght could be maybe 1/2 inch shorter
but i wanted to be sure and i was also getting a new split coupling wich i
highly recommand.
-------------------------------------------
We are pleased to offer you the following quotation. Pricing below is F.O.B.
Orillia and applicable taxes would be additional.
QTY DESCRIPTION
PRICE 1 1 x
43” AQ-19 Propeller Shaft, complete with nuts, keys and cotterpin
$392.001 50400YS Clamp-Fit Coupling
$146.001 Fit and
Face the coupling to the shaft
$110.00 We currently have a lead time of approximately 2-4
days to complete the above. We strongly suggest that the coupling be fitted
and faced to the shaft. We also pin the keyways on both ends of the shafts so
that the keyways does not move. This is all included in the fitting and facing
charge. We have customers all over and frequently ship marine related items via
courier to the east coast and all over Canada. We ship the shafting in a
sleeve on a 2 x 4” board and then the coupling would be in a separate box.
Kathy DepatieUnited Propeller and Machine Inc.220 James Street WestOrillia, ON
L3V 6H1 CanadaTelephone: (705) 325-2736Fax: (705) 325-6334email:
kathy...@bellnet.ca
To: cnc-list@cnc-list.com
Date: Wed, 5 Aug 2015 11:25:24 -0400
Subject: Re: Stus-List Looking for prop shaft for '85 33 MkII
From: cnc-list@cnc-list.com
CC: j...@jrfarrar.com
Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
Jim Watts via CnC-List
Sent: Wednesday, August 05, 2015 11:25 AM
To: 1 CnC List <cnc-list@cnc-list.com>
Cc: Jim Watts <paradigmat...@gmail.com>
Subject: Re: Stus-List Looking for prop shaft for '85 33 MkII Whereabouts are
you? Hard to recommend a source otherwise...Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC On 5 August 2015 at 07:08, J.R. Farrar via CnC-List
<cnc-list@cnc-list.com> wrote: Bumped into a log this weekend and bent the prop
shaft (and damaged the prop). Anyone know where I can find a replacement or at
least the specs/length without having to pull it from the boat first? I had an
old prop that I put on and dropped her back in the water. It’s good enough to
get me out of the marina and back to go sailing but I’d like to get one on
order and replaced asap. Thanks!J.R. Farrar
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
