Chuck, How many coats did it require to cover the black? I'm thinking about doing the same thing. Have a little two-part polyurethane left over from the spars painting project last spring.
Monty Scandia 1991 C&C 34+ Annapolis, MD On Wed, Jul 22, 2015 at 3:35 AM, Chuck S via CnC-List <cnc-list@cnc-list.com > wrote: > I painted my black pedestal in '03 with Matterhorn White, Brightside. It > held up well but had to be brushed on and took hours to dry. The key is to > sand with a course enough paper it creates a mechanical bond. Then wipe > down with the recommended thinner before painting. If you are outside, > nothing dries as fast as Krylon spray. Pick a no wind, dry morning and > spray Flat or Semi Gloss. Use several very thin coats. I used the flat on > some bare spots on my mast and spreaders and it looks great after 8 years. > > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > ------------------------------ > *From: *"Peter Fell via CnC-List" <cnc-list@cnc-list.com> > *To: *cnc-list@cnc-list.com > *Cc:*er Fell" <prf...@gmail.com> > *Sent: *Wednesday, July 22, 2015 2:39:45 AM > *Subject: *Stus-List Painting a Edson Pedestal > > > Without going through the 99-step process described on the Edson website > for painting a pedestal, what products / methods have proved successful? > The pedestal isn’t coming out of the boat. > > Peter Fell > Sidney, BC > Cygnet > C&C 27 MkIII > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
