Yes that's what I found too. The rails appear to have been drilled in place so no 2 rails or holes are the same. Ugh!
Josh On Jul 8, 2015 5:35 AM, "Bill Bina via CnC-List" <cnc-list@cnc-list.com> wrote: > I bought new handrails from TeakMarineWoodwork.com and they were very nice > pieces of wood. Just be sure to specify that you do NOT want the standard > oil finish if you are planning to varnish or use other types of finish. I > also discovered on my boat that C&C had not used a ruler when they drilled > the holes for the originals. They were not all exactly 12" on center. Check > for that before you start drilling any holes in your new rails! The bases > of the new rails are long enough to accommodate the discrepancies. > > Bill Bina > > On 7/7/2015 8:57 PM, Arnold Griesel via CnC-List wrote: > >> Neil, >> >> 1982 C&C 32 #109 has 12" inch center handrails. They are hard to find. >> This is one place that has them. >> >> http://www.teakmarinewoodwork.com/hand_rails.htm >> >> We have one broken too. I thank our local cabinet shop can make them! >> >> Arnold {:-( >> >> >> >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
