My 40 and the 41 I'm delivering south from St John, NB at the moment both have grease fitting on the tube. These are packed with grease and you give them a turn every now and then to lube the tube. Mine hadn't been done for quite some time so it needed to be repacked twice before I was confident there was enough grease in there. That eliminated the squeak for me.
Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Jun 15, 2015, at 13:20, Kevin Driscoll via CnC-List > <cnc-list@cnc-list.com> wrote: > > Jim, I do have a cover at my emergency tiller stock, but it doesn't keep the > water out. I have not experienced the squeak at the stock so can't offer > advice there. Is it possible to use something a bit heavier than McLube, but > lighter than standard grease. Triflow or similar? > > Kevin > 30-2 Osprey > >> On Sun, Jun 14, 2015 at 3:21 PM Jim Reinardy via CnC-List >> <cnc-list@cnc-list.com> wrote: >> Hello All, >> >> >> >> I have a persistent squeak when I turn the wheel on my 30-2. I have traced >> it to the emergency tiller bracket in the back of the cockpit. I can >> spray McLube in there and it will go away for a short time, but always comes >> back, especially after a rain. Was there originally a cover on the >> bracket, BTW? >> >> >> >> I don’t see a grease fitting like the lower part of the shaft has, or >> another way to get a better lubricant in there. >> >> >> >> Anyone had this issue before? I am reluctant to remove the bracket for fear >> of causing larger issues with the steering system, so reassurance there >> would also be helpful. >> >> >> >> Thanks, >> >> >> >> Jim Reinardy >> >> C&C 30-2 “Firewater” >> >> Milwaukee, WI >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
