Stus-List 27-5 pintles and gudgeons

[Bill Bina - gmail via CnC-List]

My lower gudgeon on my 27-5 has become a little sloppy after only 30 
years. My two options are to either replace it, or drill it out slightly 
oversized and sleeve it. I would much prefer to replace it if I can find 
one. Any ideas? This is a transom hung rudder and the "pintle" is really 
a 1/2 inch diameter by about 3 1/2 inch clevis pin. The gudgeon is a 
square plate (roughl;y 3x3 inch) with upper and lower bosses with 1/2 
inch holes. The part on the rudder slips between the upper and lower, 
making what looks like an oversized door hinge. I have found what they 
used on the J-24, but it is two separate pieces for upper and lower, and 
of course the holes are completely different.

Bill Bina
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com