Thanks... I'm coming from the south so I'll be going around the sand bar...
Cheers,Aaron R.Admiral Maggie,1979 C&C 30 MK1 #540Annapolis, MD Date: Fri, 22 May 2015 03:37:07 +0000 To: cnc-list@cnc-list.com Subject: Stus-List Rock Hall Approach From: cnc-list@cnc-list.com CC: dansh...@yahoo.com Pegathy takes 5'. I have run across the bar using the line formed by the Brewerton Channel East range lights several times in the last few years, and, per the charts, have never had less than 1.5 feet under the keel. I'd do it again anytime except low tide or in strong winds. Even going slowly the shortcut has saved me much time coming from the Patapsco. This is, of course, no guarantee you'll make it. I have been keeping just south of the range line. The lights are easy to line up. If you have any doubts after looking at the charts, go the long way. And, if you do choose to cross the bar, do it under power and do it slowly. That's my experience, not a recommendation. Dan SheerPegathyLF38 - Rock Creek off the Patapsco _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
