My first haul out is coming up in 3 weeks, just for a few days to do some
small tasks like unsticking a seized seacock and maybe installing a new
speed transducer (old Datamarine one is somewhat broken).

I've read Wally's site cover to cover and know he redid his thru hulls
reaming out some core and filling with epoxy (and even glassing over). But
were all model years constructed without that done or did later C&Cs start
sealing their thru hulls better? It's surprising to me that they wouldn't
have protected the core out of the factory.

Do I need to inspect all thru hulls or only prior-owner installed ones? I
might postpone this till the fall since it'll be a big job, just wondering
if it's worth pulling one now (even that I don't expect to be easy).

If all cored C&Cs were installed with coring abutting the thruhull, I'm
surprised it doesn't sound like everyone has redone them (it looks like
only 2 or 3 people have asked about it on the list - although more may have
done it). Or is the concern overdone? From the standpoint of "don't mess
with it if it ain't broke" maybe it's better to just do nothing. Except
that the plywood backing plates are wet/decayed, so eventually I'll need to
at least do something with those (which may or may not involve replacing
the seacock and thruhull too).

-Patrick
1984 LF38 "Violet Hour"
Seattle, WA
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to