Hi Mike
I meant as a DIY project... there are not a lot of parts in one of
those. But you could also try DAC or one of the others, I'm sure they
would be OK with rebuilding it. The only part that might be iffy is
pressing in a new bearing.
Graham Collins
Secret Plans
C&C 35-III #11
On 2015-05-14 9:22 AM, Hoyt, Mike via CnC-List wrote:
Thanks Graham
Who does the rebuild of these? It sounds like a faster and simpler
solution
Mike
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Graham Collins via CnC-List
*Sent:* Wednesday, May 13, 2015 9:35 PM
*To:* cnc-list@cnc-list.com
*Cc:* Graham Collins
*Subject:* Re: Stus-List Yanmar questions for all you experts
Hi Mike!
Were it mine I'd rebuild it first - my engine is raw water cooled and
started dripping, took a couple of seals and not a lot of work to get
it right.
For parts as has been noted Rosborough is the official marine dealer
currently. If you are around Burnside you could try Liftow, they are
no longer the dealer but may have some bits left. They are up at the
top of Wright Ave, up the hill coming up from the harbor. Another
possibility is DAC Industrial, they used to be a Yanmar industrial
dealer but got busted selling marine parts when they were not supposed
to. They may also have some old stock, I got a gasket and a belt from
them last season.
The Marine diesel direct site is great for diagrams and info, it
annoys the heck out of me that they can't sell out of their region.
Graham Collins
Secret Plans
C&C 35-III #11
On 2015-05-13 11:25 AM, Joel Aronson via CnC-List wrote:
Try here:
http://www.marinedieseldirect.com/catalogs/catalog_group.php?owner=mdd&page_ident=Y00F5062-34&model=3GM30F&manufacturer=Yanmar&title=COOLING%20FRESH%20WATER%20PUMP&quant_position=4&catalog=Y00F5062&printparts=&printservice=&printoperators=&comment1=
The answer is always "the more expensive one!"
Joel
On Wed, May 13, 2015 at 10:12 AM, Hoyt, Mike via CnC-List
<cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
Engine: Yanmar 3GM30F
Have come across two part numbers at different costs.
1.128695-42010 “Cooling Fresh Water Pump” . Generally selling for
around $270 USD
2.121000-42100 “Fresh Water Pump Assembly”. Selling $176.95 CAD
at boat house
Is the second a component of the first? Anyone know the
difference and which is needed to be replaced when the seals start
to go resulting in the leak from weeping port?
Mike
Persistence
Halifax
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to
the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
--
Joel
301 541 8551
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
