Dave

Partial answers:

Sea talk ng is NMEA 2000 with a smaller connector. You can get an NG to
2000 cable. You need the T122. That gets you NMEA 183. If you need NMEA
2000 input than you need the Actisense converter. another $200.
 Airmar makes all the transducers. You can get a NMEA 2000 compatible with
your plotter.
You can also connect the autopilot with an NG to 2000 cable. I recommend
you do it so you can steer to a waypoint.

Joel

On Sunday, April 12, 2015, David Knecht via CnC-List <cnc-list@cnc-list.com>
wrote:

> Hi all- I need some help and advice on electronics interfacing.  Today I
> finished installing a Raymarine wheel pilot EV-100 today, so I now have a
> Seatalk bus that interconnects that system (which might be irrelevant).
> When I bought the boat, it had not wind instruments so I installed a
> Tacktick Sensor on the mast and a dual display at the helm, thinking that
> wireless was a good idea.  I still think it is, but the whole concept seems
> to be lagging.
>   I had a Lowrance HD7 at the helm station and I never liked it.  In order
> to get Sailsteer function for racing, I purchased a Zeus T8 at the recent
> Defender sale.  Now I am trying to figure out how to put it all together.
> I am not concerned at this point about getting the autopilot to talk to the
> chart plotter.  Perhaps a future project, but I doubt it.  I am more
> concerned about getting the wind data into the Zeus T8 which apparently I
> need for Sailsteer.  I might also want to get the hull speed sensor into
> the Zeus at some point (old B&G running currently into an old Focus
> display).  I also have a Standard Horizon GX2150 radio that has AIS
> functionality.
>
> So right now there is a double cable (power and 0183) to a single
> connector coming through the Edson pedestal  that ran into a single
> connector on the Lowrance.  So what to do?  The Zeus has separate inputs
> for Echo transducer?, power, video (NMEA 0183), NMEA 2000 and network.
> 1.  Do I need to cut those cables and run new 0183 and power to the Zeus?
> Is there any such thing as a converter plug so I can use the existing runs
> of wire?
> 2.  How do I get the wind data from Tacktick to the Zeus.  Presumably, I
> need a Raymarine T122.  But the guy at defender said I also needed a
> Actisense converter.
> 3.  Can I send multiple 0183 inputs into the Zeus?  If I wanted to have
> the AIS data, but also add a Raymarine T122 how would those be wired to
> both go to the Zeus? Is there such a thing as a hub or multiplexer for 0183
> or is that not needed?
> 4.  If I wanted to get speed through the water to the Zeus (do I need
> this?), I presume I would have to replace my sensor.  The T8 manual shows a
> "Echo Transducer” going into the first input, but I am having trouble
> finding something called that for sale?
> 5.   I don’t understand the difference, if any, between the B&G NMEA2K and
> the Raymarine Seatalk.  Are they different or interchangeable?
>
> I hope I have provided enough information for the experts to understand
> the issues.  Any advice appreciated.  Thanks- Dave
>
> Aries
> 1990 C&C 34+
> New London, CT
>
>
>

-- 
Joel
301 541 8551
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to