Furler is sold ... finally!! For reference, it came apart quite easily with a heat gun, screwdriver (this model has set screws, not drift pins) and a stout putty knife to get the foil sections separating.
Peter Fell Sidney, BC Cygnet C&C 27 MkIII From: Peter Fell Sent: Sunday, April 27, 2014 6:13 PM To: cnc-list@cnc-list.com Subject: Stus-List Harken Furler for sale - Sidney, BC For Sale: Mark 1 Unit 0 Harken furling gear. Drum assembly, integral turnbuckle, 7/16" diameter toggle, torque tube, halyard swivel. Approximately 37-1/2 feet total length, but the top 4-inches or so of the foil is damaged. The foil is still assembled and the forestay is still installed but the top portion of the forestay is damaged as well. Foil would have to be trimmed back to a shorter length and new forestay installed. However, when it was removed from the boat, there was some spare foil length under the bottom collar. The furler is date stamped 1993 but the rigger who installed my new unit deemed this one to be in very good condition. Located in Sidney, British Columbia ... 5-minute walk down the road to a local marina, so easy to transport the furler to your boat. Asking $400 Peter Fell Sidney, BC C&C 27 MkIII -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com