Micron Extra is great for Chesapeake. I paint every other year, No growth between paints. Not sure how it would do in Halifax.
Cheers, Aaron R. Admiral Maggie Annapolis, MD 30-1 > On Mar 30, 2015, at 2:41 PM, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> > wrote: > > > I was in Maine skiing last week and took a morning off to drive to Hamilton > Marine in Searsport to pick p a gallon of Micron 66. This mostly based on > Bob Abbott’s experience on Azura which is moored near our boat. > > While there I was looking at the active ingredients on Micron 66 vs Micron > Extra. The Micron Extra is considerably cheaper and it seemed the copper > content not a whole lot less. Does anyone on this list have good experience > with the two and what the big difference is between then and what the > difference in their intended usage? For good measure perhaps throw in how > these two compare to Micron CSC. > > The old email from Chuck below brought this back to my attention. > > Thanks > > Mike Hoyt > Persistence > Halifax, NS > > From: Chuck S [mailto:cscheaf...@comcast.net] > Sent: Tuesday, March 10, 2015 8:04 PM > To: Hoyt, Mike; CNC boat owners, cnc-list > Subject: Re: Stus-List bottom paint > > Used Micron 66 after reading about it on this list. Great paint for salt > water. Fast and stays clean compared to VC-Offshore which requires frequent > scrubbing. > I moved my boat to Chesapeake and now have to change. I'll probably go to > Extra and burnish lightly. > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com