I don't have Raymarine, but my ComNav unit wasn't turning like it should
and I lubricated it with spray silicone.  It seemed to fix the problem.

Gary
S/V Expresso
75 C&C 35 Mk II
East Greenwich, RI, USA

~~~~~~~_/)~~~~~~


On Mon, Mar 30, 2015 at 6:15 PM, ahycrace--- via CnC-List <
cnc-list@cnc-list.com> wrote:

> Dave
>           I just read that you will be taking the wind unit from Monty,
> good luck I hope everything works out for you. If you have trouble and it
> does not work out for you keep me in mind as I am also looking for one. The
> one I have does not spin as freely as it should.
>
>       Gary Kolc
> ---- ahycrace--- via CnC-List <cnc-list@cnc-list.com> wrote:
> > Monty
> >            I have the ST60 as well and my unit always spins slower than
> the other units in the marina and when things get real light it won't turn
> at all. I tried lubing it with a dry lube product and that helped a little
> but not much. Did you notice that issue with your setup when you were using
> it?  Also If Dave is not interested in your unit I would be it might spin
> better than mine.
> >
> >                                                                 Gary Kolc
> > ---- Monty Schumpert via CnC-List <cnc-list@cnc-list.com> wrote:
> > > David,
> > > I have one for a Raytheon ST60 which I'm replacing this year. The mast
> is
> > > down and I can get it today if you want it. It has about 60-70 feet of
> > > cable and I have a junction box you can have as well. I have no use
> for it
> > > and you can have it for the price of postage if you want. I have the
> > > display head also if you need that.
> > >
> > > Monty
> > > Scandia
> > > 1991 C&C 34+
> > > Annapolis, MD
> > >
> > > On Sat, Mar 28, 2015 at 11:48 AM, davidrisch75 via CnC-List <
> > > cnc-list@cnc-list.com> wrote:
> > >
> > > > Need a mast wand for an ST 60.  Anybody have one for sale?
> > > >
> > > > David F. Risch.
> > > > 1981 40
> > > >
> > > > Please excuse brevity and possible typos...sent from my mobile
> device.
> > > >
> > > > _______________________________________________
> > > >
> > > > Email address:
> > > > CnC-List@cnc-list.com
> > > > To change your list preferences, including unsubscribing -- go to the
> > > > bottom of page at:
> > > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> > > >
> > > >
> > > >
> >
> > _______________________________________________
> >
> > Email address:
> > CnC-List@cnc-list.com
> > To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> >
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to