After replacing float switches more than once, I switched to the Water Witch. It gets the water lower in the bilge, and it comes with a five year warranty.
Alan Bergen 35 Mk III Thirsty Just to be clear. The Water Witch switch https://www.waterwitchinc.com/new/SiteElements/Pages/SecondaryPages/Products/BilgeSwitches.html is 100% solid state with no floats or any moving parts. It doesn't cycle needlessly either, It just has one or 2 "sensor" plates (depending on the model) that probably measures + voltage to ground difference / conductivity. Long story short: It knows when the bilge water level is above the threshold, even with some oil (Transmission leak, another story) and other crud it has never miss-fired or failed. So far, fool proof and used by both Canadian and US coast guards if that means anything.. Regards Francois Rivard 1990 34+ "Take five" Cumming, GA
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
