I might be interested in buying an old AH4000 box.
Joe Della Barba j...@dellabarba.com Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Bousfield via CnC-List Sent: Tuesday, March 03, 2015 8:19 AM To: Bradley Lumgair; cnc-list@cnc-list.com Subject: Re: Stus-List Autohelm and raymarine Bradley, I have a Autohelm 5000 and ran into similar issues. I am updating all my instruments with Raymarine and found out I can use my existing linear drive unit just replace the control head using the EV200 then all my instruments will communicate. I am using the linear drive because I have a complete spare that came with the boat. Check with Raymarine, I am having the Autohelm work done by a certified Raymarine installer. It is a little out my depth. John & Marjolein Dutch Girl 1979 C&C 36 Spring Lake, Mi On Mon, Mar 2, 2015 at 10:15 PM, Bradley Lumgair via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: Well I was over to see the boat today, brought the Autohelm 4000 control box home with me. Appears like its an original so there will be no chance of communication going on between it and the new stuff. :(( no trace of anything other than "Autohelm4000" and made in England so it's got to be as old as dirt! Sent, miraculously through cyberspace, from my iPad! _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
