I bought rough Sawn teak from a guy on Craiglist for a couple hundred bucks.  
Enough to make two sets as it turned out.  I made my own with a jig saw, router 
table and used the the old hand rails as templates.  Had them done in a day and 
took over a week at one coat of finish a day for 8 days. I used epiphanies.  
They really came out nice!


From my Android phone

-------- Original message --------
From: Curtis via CnC-List <cnc-list@cnc-list.com> 
Date: 02/22/2015  4:48 PM  (GMT-05:00) 
To: Paul Fountain <p...@seasource.ca> 
Cc: "<cnc-list@cnc-list.com>" <cnc-list@cnc-list.com> 
Subject: Re: Stus-List (no subject) 
 
So I ha no Idea it would be so pricy. Here is what I was quoted. Is this a DIY 
project? should I try to make my own?
Help$$$


Solid Teak Handrails:
Qty (2) – 9-Loop
12” Centers
112” overall length
1” Thick
2-1/2” High
4” Pad Bases
Qty (2) – 6-Loop
12” Centers
76” overall length
1” Thick
2-1/2” High
4” Pad Bases
Furnished finish sanded, cleaned, and ready for application of finish coats by 
others.
Pricing:
 
(2) 9-Loop & (2) 6-Loop Solid Teak Handrails - - - - - - - - - - - - $1,070.00
 
Packaging - - - - - - - - - - - - - -  - - - - - - - - - - - - - - - - - - - - 
- - - - $    55.00
 
Packaging & Shipping via Motor Freight - - - - - - - - - - - - - - - $   237.00
 
Total Project - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
-$1,362.00
 
Note:
 
The above prices are valid for thirty (30) days from the date of this proposal. 
 
Delivery:
 
Typically 8 - 12 weeks, dependent upon prior commitments at date of order entry.
 
Payment:

On Sat, Feb 21, 2015 at 8:04 PM, Paul Fountain <p...@seasource.ca> wrote:
Had new ones made for Perception by Mark Bruckmann, Bruckmann Yachts, his dad 
was one of the original 3 builders that formed C&C .... Ran the custom shop. 
They look great on the boat!

Sent from my iPad

On Feb 21, 2015, at 5:53 PM, Curtis via CnC-List <cnc-list@cnc-list.com> wrote:

I need to replace the 9 loop deck rails and 6 loop interior hand rails on my 
C&C30 MK1. they where terrible in shape when i bought the boat 2012. I 
refinished them and rebedded, but they have served the old girl well. I have 
checked the web found a few sources, but I wonder if any owners have found the 
exact replacement ones? Let me know. Thanks for your time. Capt Curt.
-- 
Best regards,

Curtis McDaniel, 

C&C 30-MK1 East Coast Lady

Twenty years from now you will be more disappointed by the things that you 
didn't do than by the ones you did do. So throw off the bowlines. Sail away 
from the safe harbor. Catch the trade winds in your sails. Explore. Dream. 
Discover.  -Mark Twain
http://eastcostlady.blogspot.com/

 


cpt.b...@gmail.com

 

~~~~ __/) ~~~~

. 



_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




-- 
Best regards,

Curtis McDaniel, 

C&C 30-MK1 East Coast Lady

Twenty years from now you will be more disappointed by the things that you 
didn't do than by the ones you did do. So throw off the bowlines. Sail away 
from the safe harbor. Catch the trade winds in your sails. Explore. Dream. 
Discover.  -Mark Twain
http://eastcostlady.blogspot.com/

 


cpt.b...@gmail.com

 

~~~~ __/) ~~~~

. 



_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to