If anyone is interested, including you Paul, I actually have 3 mufflers out in my storage shed that are available. Two were purchased when I installed the current Universal M35 in my 38 mkII back in 2011, and the third is the muffler that was taken out of the boat.
The old muffler is a Westerbeke Hydrohush horizontal water lock muffler, 2” in 2” out, that was part of the previous exhaust installation. Second is a rectangular Vetus waterlift that has interchangable 1 ½ and 2” inlet and outlets , and the outlets can be turned to get anything from horizontal to vertical orientation. There just was not enough room on the port side of my engine for the rectangular footprint. Then I bought a Vernalift with top in top out that was quite small – maybe 10” diameter by 8” tall. The footprint is OK, but the muffler had to be installed on the starboard side of the engine to make the hose routing work, so top in was not ideal. Ended up with a small Vernalift, side in top out which was just the ticket. Wish I had done a little more measuring and planning before I spent the money. One of these days I need to put the mufflers on EBay. For now, if anyone is interested drop me a line and I’ll make you a heck of a deal. I can send dimensions and photos. Rick Brass Imzadi C&C 38 mk 2 la Belle Aurore C&C 25 mk1 Washington, NC From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of PME via CnC-List Sent: Monday, February 09, 2015 7:17 PM To: cnc-list@cnc-list.com Subject: Stus-List Landfall 38 lift muffler Hi, I just rebuilt the 3QM30 which I received when I purchased Johanna Rose. The previous owner had the engine removed and dismantled, and I received the engine as a bare block with boxes of rusty parts. It was a real basket case. This weekend I managed to shoehorn the engine back in, and now I am at the point where I need to install a lift muffler. It looks like there was one in a small space on the port side of the engine as there is a bulkhead hole the size of an exhaust hose. But his space looks too small for a vernalift-like waterlock muffler(and a little high relative to the exhaust elbow). I don’t have the original muffler, so I need to purchase a new one. Has any LF38 owners purchased a replacement muffler? I would be interested in hearing what you choose and your configuration. I hope to be back afloat soon. It’s been slow working only on weekends... Thanks for any insight, - Paul Eugenio 1981 C&C Landfall 38 S/V Johanna Rose Carrabelle, FL
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
