Chris If you can post pics to a photo sharing location and then post the location on this list you will get a lot of helpful suggestions on what to keep and what to discard. It seems you are already on the right track
Congratulations on the boat Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of chris hulett via CnC-List Sent: Wednesday, February 04, 2015 4:28 PM To: Marek Dziedzic; cnc-list@cnc-list.com Subject: Re: Stus-List C&C24 Yes I did take pictures of all rigging , i see what you are saying . Thank you for your help. I will look at the pictures from a week ago . On Wednesday, February 4, 2015, Marek Dziedzic via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: One of the big improvements was the change from the main sheeting to the cabin top (without the traveller) to a traveller in the cockpit. That change improved dramatically trimming of the main, even if some complained that the traveller was getting in the way of getting into the companion way. There was a good picture on the boat for sail in BC (?) just a week or so ago. Marek (ex. C&C 24 Fennel) From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<javascript:_e(%7B%7D,'cvml','cnc-list-boun...@cnc-list.com');>] On Behalf Of Hoyt, Mike via CnC-List Sent: February-04-15 14:28 To: chris hulett; cnc-list@cnc-list.com<javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> Subject: Re: Stus-List C&C24 Did you take pictures prior to stripping off the hardware? Some of the added hardware may be a big improvement on the original as many of the older C&Cs came with hayards led to mast base, no boom vang, no backstay adjuster, no genoa tracks etc and many boats have been upgraded to run lines to cockpit and added very necessary sail and rig trim adjustments Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<javascript:_e(%7B%7D,'cvml','cnc-list-boun...@cnc-list.com');>] On Behalf Of chris hulett via CnC-List Sent: Wednesday, February 04, 2015 3:20 PM To: cnc-list@cnc-list.com<javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> Subject: Stus-List C&C24 I have a C&C24 that I recently purchased and it needs a lot of work.I have striped everything off of the deck and in the process of fixing all the fiberglass , when I've finished I will start installing all the deck hardware and lines, it looks like over the years the boat owners have added extra hardware . I'm wanting to get this boat back to original hardwsre and lines , so if anyone has pictures of how a C&C 24 should rig I wold live to see them.
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
