I have that setup on my 27-5 and it works wonderfully. I have the
bracket model 71033. It has a nice long travel, and is rated for enough
weight for the Yamaha 4-stroke. My boat came from the factory with an
outboard. The 71033 allows the motor to be a couple inches out of the
water when the bracket is full up, and the outboard tilted. It also
allows it to get the shaft deeper in the water than many setups I've
seen. That is important. I have a thick plywood plate with large metal
washers on the inside, and a 1 inch thick mounting pad made of Starboard
on the exterior.
Bill Bina
On 2/3/2015 10:43 AM, Dan Utinske via CnC-List wrote:
I want to mount a Garelick bracket on my stearn to support a Yamaha
9.9 4 stroke. I've seen at least on C&C 26' with an outboard; anyone
have any experience mounting and anything unusual that I can expect?
Probably better off having it done by a professional, any opinions?
Dan Utinske
C&C 26' "Only Time"
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
