The fittings are standard pipe thread, when they go I convert them to 1/2" nylon reinforced hose, no more mystery leaks.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 28 January 2015 at 17:59, Indigo via CnC-List <cnc-list@cnc-list.com> wrote: > I found a good selection a few years ago at an RV equipment supplier. > Bought a whole load of spares "just in case" > > -- > Jonathan > Indigo C&C 35III > SOUTHPORT CT > > On Jan 27, 2015, at 00:59, Kevin Driscoll via CnC-List < > cnc-list@cnc-list.com> wrote: > > I am having difficulty finding a source for the press/nipple fitting on > the gray semi rigid PVC plumbing for our water system on our 89 30-2. One > of the fitting s has been weeping a bit at the Raritan 6 gallon hot water > tank I replaced recently. I suspect they are not intended to be reused or > it was deformed by over torquing by amateur marine plumbers such as myself. > Any leads? Has everyone moved on to PE and quick connect fittings? > > I don't have a good photo except of the old heater before I removed it. > The image is looking down onto the heater with the water supply on the > right. The broken coupling was someone else's doing but was water tight. > https://docs.google.com/file/d/0BwhcX19YaPJ8ZmlnVkEzTTVySXM/edit?usp=docslist_api > > Thanks again. > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
