This spring, I was able to replace the diaphragm and valve seals on the Jabsco 
pump from my 1988 30-2 to stop a leak.  It sounds very similar to yours.  That 
model number does not look current, but here is a good selection of rebuild 
kits:


http://www.defender.com/itt-jabsco-pump-service-kits.jsp


Jim Reinardy

C&C 30-2 “Firewater”

Milwaukee, WI 








Sent from Windows Mail





From: Della Barba, Joe via CnC-List
Sent: ‎Wednesday‎, ‎September‎ ‎3‎, ‎2014 ‎10‎:‎11‎ ‎AM
To: Jean-Francois J Rivard, Della Barba, Joe via CnC-List










Where is the leak?  Service kits may be available for this pump.  Jabsco 
renumbered their pumps some time ago.  This pump may use the same service kit 
as a current pump.


Barring that, both the Par and Shurflo pumps have good reliability.  My 
experience seems to indicate the Shurflo pumps are slightly quieter.  Both have 
available service kits.

I would look at the Shurflo 3.0 GPM Aqua King or the Par Max 2.9 GPM.

Dennis C.
Touche' 35-1 #83
Mandeville, LA 




On Wed, Sep 3, 2014 at 8:28 AM, Jean-Francois J Rivard via CnC-List 
<cnc-list@cnc-list.com> wrote:



Good am all, 

We had another great weekend on the boat and I finally confirmed that my fresh 
water pump is the culprit on the leak I've had for a couple months.  Easier to 
fix than finding a leak in the hoses or at a joint somewhere..   

The Pump is the original Jabsco with diaphragm and plunger looking thing  model 
500736 I believe.  

 I only have 3 outlets on board so the extra capacity models can  be excluded.  
Also, I don't really want to up the pressure as I don't want to have to re-wire 
for more amps and I don't want to overstress the aging plastic connections 
(I've replaced a few already... Not fun) 

So that leaves us with the 3.0 GPM range automatic pumps 6 amps or so draw, 40 
or so PSI  I'd like something quieter and less pulsating would be nice.  I have 
seen an accumulator in the aft sail locker but I don't think it's connected, it 
was probably working in tandem with the missing water heater..(Yet another 
project there) . 

Even narrowed down, there is still a bewildering array of brands, technologies, 
and prices..  

Any suggestions and prior experience wisdom is much appreciated.. 


-Francois Rivard
1990 34+  "Take Five" 
Lake Lanier, Georgia

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to