Have you ever tried Sailkote. If there is anything that needs lubricating, this things usually works.
Marek (in Ottawa) -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dwight via CnC-List Sent: Wednesday, August 13, 2014 5:36 PM To: 'Pete Shelquist'; cnc-list@cnc-list.com Subject: Re: Stus-List block lubricant Try Fluid film Dwight Veinot C&C 35MKII, Alianna Head of St. Margaret's Bay, NS -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pete Shelquist via CnC-List Sent: August 13, 2014 2:47 PM To: cnc-list@cnc-list.com Subject: Stus-List block lubricant We just finished a week long distance race series and during the race I noticed that the blocks that we lube with T-9 become pretty gunked up. We cleaned with a solvent, rinsed with soapy water and fresh water, then re-applied. Same result after a day or two. Anyone have similar experience? Does anyone have another product suggestion? Anyone use Mclube One Drop? Thanks, Pete 37 Lake Superior _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4716 / Virus Database: 3986/8000 - Release Date: 08/07/14 _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
