Burt,

 

Both blades are usually attached by a single large pin (Martec for example).
You should see maybe an 1/8" of play between the blades.  Martec rebuilds
them by drilling the hole out for the next larger pin size.  It lasts quite
a while.  Mine is over ten years old and still going strong.

 

Jake

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Burt
Stratton via CnC-List
Sent: Tuesday, July 08, 2014 10:39 AM
To: 'Josh Muckley'; 'C&C List'
Subject: Re: Stus-List folding prop

 

Thanks. I was wondering about that. There seems to be some play and I don't
know enough about them to assess it. The play seems to be at the connection
to the shaft, not where the blades hinge to the base of the prop. In other
words the whole prop will move a little on the shaft. 

 

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to