Bob i replaced my Barient 28 with Anderson 52 it was direct replacement with the same foot print. I will try to see you sometime second week of May.
Best Wishes Frank LF 38 SY GDYNIA Sent from my iPad > On Apr 14, 2014, at 4:31 PM, Robert Boyer <dainyr...@icloud.com> wrote: > > This past weekend I disassembled, cleaned, lubricated, and reassembled 4 of > my 7 Barient winches and I did 1 two weekends ago--so 5 of 7 have been done. > My Barient 22 and 18's got new pawls, pawl springs, and circular spring clips > (purchased from West Marine but the originals still worked after 30 years). > My Barient 28's are a different design than the smaller Barients but no spare > parts were needed. Unless something is grossly wrong with the operation of > one or more of your old Barients, you probably won't need spare parts. One > of my 28's was bound up pretty bad and I had to work some solvent down into > the bearing to loosen it up so that I could get the drum off--now it turns > very freely! > > Bob > > Bob Boyer > S/V Rainy Days > 1983 C&C Landfall 38 - Hull #230 > Annapolis, Maryland > email: dainyr...@icloud.com > blog: dainyrays.blogspot.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
