Hi, I also agree. When checking the rate of flow from the hose put output water into a 5 gal bucket. The Yanmar 3QM30 manual states that the flow rate at 1400 rpm should be 800 l/hr or 3.5 gal/min.
- Paul E. 1981 C&C 38 LF S/V Johanna Rose Carrabelle, FL On Apr 10, 2014, at 3:47 PM, cnc-list-requ...@cnc-list.com wrote: > Message: 3 > Date: Thu, 10 Apr 2014 14:15:13 -0500 > From: "Dennis C." <capt...@gmail.com> > To: CnClist <cnc-list@cnc-list.com> > Subject: Re: Stus-List Repower LF 38 and anchor wondlass? > Message-ID: > <CANir+yvBwk-LkO8Z=FjqNm-49zo2o1nQC=8mxyhlm+dgcvq...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > There can be lots of simple reasons why an engine overheats. My Universal > overheats if the belt is loose. > > Pull the hose from the mix elbow and see if you have good flow. If you do, > maybe the elbow is clogged with soot. If you don't have good flow, work > your way upstream until you find why. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
