I'm not sure the able wii come out the bottom. On my boat the two levers neded to be removed from the mechanism, and then the cables came out the top after the screws retaining the cable sheaths wears removed.
Rick Brass Sent from my iPad > On Mar 23, 2014, at 0:51, Rich Knowles <r...@sailpower.ca> wrote: > > On mine, there is a screw through the side of the top of the tube housing the > cable that attaches the end of the cable jacket to the inside of the tube. > Check to see if you have that screw and undo it. That should allow the cable > to be pulled out the bottom of the cockpit sole. > > Rich > >> On Mar 23, 2014, at 1:22, "Martin \"Mac\" McKenzie" <seawor...@rogers.com> >> wrote: >> >> HI all, >> >> I have a stiff shift cable on my C&C. I have the separate shift and throttle >> on either side of the pedestal guard not on the pedestal itself. The cable >> runs up the stainless tube. Has any one ever tried to replace this cable? >> >> I cannot figure out how the cable is attached inside the tube. I have >> disconnected the shift lever so the cable is free at that end. There is no >> way I can pull the cable out from underneath. >> >> I know it's the cable that is stiff and not the linkages or transmission. >> >> Any ideas? >> >> Mac >> Worthy Pearl >> 1983 C&C 37 >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
