Steve, Give Terry at CMC a call, they are the Canadian Distributor, and Terry is their tech and is usually very helpful.
-----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of OldSteveH Sent: February 20, 2014 1:07 PM To: cnc-list@cnc-list.com Subject: Stus-List E7 Question Hello all, I have my E7 at home and want to send it for replacement under their recall. I need to power it up to archive my routes and waypoints however the wiring harness is at the boat (2.5 hours away). The + and - power pins on the connector are obvious, but does anyone know which is which, I am afraid of reversing polarity and damaging the unit. I checked the manual and searched online but came up with nothing. Also checked resistance between pins and casing to ID the negative pin. However probably due to capacitance on the board, there are funky resistance readings and its hard to tell which pin is ground. Cheers Steve Hood S/V Diamond Girl C&C 34 Lions Head ON _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
