Our Nova Kool installation is old, but the compressor is cunningly mounted on top of the galley drawers up in the coaming. It's probably not the best location in a warm climate...
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 22 January 2014 16:29, Joel Aronson <joel.aron...@gmail.com> wrote: > Doug, > > Did an Isotherm 2501 in my 35/3 last year. Hardest part was running a > wire from the breaker to the lazarette for the compressor. I made a shelf > fo the compressor out of plywood and epoxied it, only because I had some > epoxy laying around. I drilled 2 holes in the back of the icebox for the > copper lines and used a can of foam from Home Depot to fill them. Attached > the evaporater with spacers and screws. > > Joel > 35/3 > The Office > > > On Wednesday, January 22, 2014, Doug Allardyce <dalla...@ameritech.net> > wrote: > >> All, >> I'm in the process of updating a 1985 C&C 35 MK 3. One of my projects is >> installing a refrigeration unit. As I'm in the planning phase, I'm looking >> to hear from anyone who has already done an installation. I would be >> interested to know what unit was selected, and how it was installed. If >> anyone has pictures that would be great >> >> Doug Allardyce >> 1985 C&C 35 MK III "Bullet" >> Detroit >> ~~~~~~~~_/)~~~_/) ~~~~~~~~ >> >> >> >> > > -- > Joel > 301 541 8551 > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
