Cut some PVC or pex pipe lengthwise to make a bearing and push it into the end of the foil. Secure with short self tapping screws through the foil.
Rich > On Jan 18, 2014, at 22:29, "Peter Fell" <prf...@gmail.com> wrote: > > Thanks Dennis > > Rides on the barrel of the swage. > > I wonder if I can trim this down? I didn’t think by looking at the info > available online that it should ride on the forestay. > > I’m ordering a new genoa within the next two weeks .... so now’s the time to > fix this. > > Here are some pictures: > > http://imagizer.imageshack.us/v2/800x600q90/707/1lxd.jpg > > http://imagizer.imageshack.us/v2/800x600q90/836/pll3.jpg > > http://imagizer.imageshack.us/v2/800x600q90/571/fw5u.jpg > > That forestay needs to be replaced and currently there is no halyard > restrainer either. Discussing those with a rigger right now. Of course I > could just replace the furler as well ....I’ve gotten some info on new ones. > I can get a Mark IV Unit 0 for under $1200. Toggle and restrainer would be > additional to that. Or a Furlex for about $1600 that includes toggle, > restrainer and forestay. > > From: Dennis C. > Sent: Saturday, January 18, 2014 5:22 PM > To: Peter Fell ; cnc-list@cnc-list.com > Subject: Re: Stus-List Harken Furler Mark 1 Unit 0 > > Peter, > > I don't think my buddy and I have any parts for a Mark 1. I will check with > him tomorrow. He may have something in his "gold pile". We haven't worked > on a Mark 1 in a long while. > > Last Mark 1 I worked on was basically an upgrade to the newer extrusions to > get rid of the roll pins. > > As for the top cap, is the top of the extrusion riding on the barrel of the > swage eye or on the wire? > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > > From: Peter Fell <prf...@gmail.com> > To: cnc-list@cnc-list.com > Sent: Saturday, January 18, 2014 3:25 PM > Subject: Stus-List Harken Furler Mark 1 Unit 0 > > Just wondering if anyone local has a manual and parts list for a Mark 1 Unit > 0 furling unit that I could borrow and copy. > > Looking for parts too. Mine is missing a chunk out of the top of the > uppermost foil + the top cap. So I’m looking for a foil piece, cap, possibly > foil connector, etc. I’ve got a partial copy of the parts list – looks like > might have been a couple versions of this unit. > > Peter Fell > Sidney, BC > C&C 27 MkIII > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
