Well, I don't see where angling would help much.you might get optimum
positioning on the day you installed but.surely the boat won't stay angled
the same way to the sun all the time, especially while under sail.would not
collector face up and parallel to the water be the best for maximum output?

 

  _____  

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh
Muckley
Sent: January 11, 2014 2:38 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List mounting solar panels

 

Consider angleing the panel to the same/approximate degree as your normal
latitude.  Envision the sun's rays impacting at a right angle to the face of
the panel.  You can use a small rod or bolt extending perpendicular to the
panel.  At high noon adjust the panel so that there is little to no shadow
cast from the bolt.

Josh Muckley
S/V Sea Hawk
Solomons, MD

On Jan 11, 2014 1:31 PM, "Eric Frank" <efran...@mac.com> wrote:

Just realized it would be much easier to mount the panel on the pole (which
runs right along side the backstay) that supports the radar dome.  Side-pole
mounts are quite available, not expensive, and with that I can put the panel
above where the bimini is located.  Also like the idea of getting it off the
rail.

Thanks for the comments from Dave and John.

Eric

> From: David Knecht <davidakne...@gmail.com>
> To: CnC CnC discussion list <cnc-list@cnc-list.com>
> Subject: Re: Stus-List mounting solar panels
> Message-ID: <e44c778c-34cc-4e43-9c3c-6f4075c6f...@gmail.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I just received a 50W panel that I plan to install in the spring.  I plan
to put velcro strips on the sliding companionway hatch and mount it there
when I am not on the boat and move it below when I am.  Dave
>


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

  _____  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2247 / Virus Database: 3658/6494 - Release Date: 01/11/14

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to