Could not find any picture of it.
My install looks like Jim's one. I also has a vertical Lofrans 1000 (very low
profile). The shelf is tab to the hull sides, and two legs goes down to the
locker bottom. Everything is at least an inch thick covered and welded to the
hull and bulkhead with fiberglass & epoxy. I cannot see the core, but almost
sure it is marine plywood. Must have been a pita to do the fiberglass work. It
looks almost as an original factory job.
Cannot comment on the performance of it, because we did not anchored yet (shame
on me) in the 2 years we have her. Only took the chain out to clean the locker
last summer. Lots of mooring balls and reciprocal club around here.
Pierre Tremblay
Avalanche, hull #76
C&C 38-3, WK
________________________________
De : Jim Watts <paradigmat...@gmail.com>
À : 1 CnC List <cnc-list@cnc-list.com>
Envoyé le : lundi 6 janvier 2014 23h49
Objet : Re: Stus-List Under deck windlass installation.
Here's mine...a couple of changes ago. Knees glassed into hull just above balsa
line, windlass shelf bolted onto knees. I later added a Starboard clatter pad
in front of the anchor locker.
http://members.shaw.ca/parmesanshift/images/IMG_0953.jpg
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
