I agree on the PEX. FWIW, when I redid my plumbing, I added a large, household size, activated charcoal filter in the feed line to the fresh water pressure pump. I change the element every spring and have good tasting potable water at all times.
Rich > On Dec 19, 2013, at 12:05, "Marek Dziedzic" <dziedzi...@hotmail.com> wrote: > > +1 for PEX. But I would not rip all the existing plumbing and replace it. At > least, you won’t sink the boat if your plumbing fails (you may flood the > bilge, but it is not critical). > > Marek > _____________________________________________________________________ > ------------------------------ > > Message: 2 > Date: Thu, 19 Dec 2013 07:46:47 -0500 > From: "Jake Brodersen" <captain_j...@cox.net> > To: <cnc-list@cnc-list.com> > Subject: Re: Stus-List Marine Plumbing > Message-ID: <070801cefcb8$61948b30$24bda190$@cox.net> > Content-Type: text/plain; charset="us-ascii" > > Josh, > > > > I have had several failures of the grey butyl plumbing pipe. I have > replaced it with PEX tubing. It is flexible and easy to work with and > available in many places. I find RV stores a good place to pick it up. The > fittings are compression type and will mate with the existing plumbing. To > me, it's a no-brainer. Oh, and did I mention that it's cheap.??? > > > > Jake > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
