Hi John. That's exactly the dimensions. It's a 10P. I'll try to send a picture. The cracked one is in my workshop but the good one is tucked away on my boat for the winter. It feels like aluminium
Brent. Sent from my iPhone > On Dec 4, 2013, at 9:43 PM, John Russo <johnrussob...@optonline.net> wrote: > > Brent the 22’s are two speed and now I will probably not get them off the > boat until spring and am sort of contemplating their use for the spinnaker. > Won’t know for a bit . Does your good #10 measure 4-3/8” Diameter at the > Drum base and 3-3/4 ‘ high? A quick peek under the base should tell you the > material or I could look up the weight to try to determine it. > John > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brent > Driedger > Sent: Tuesday, December 03, 2013 9:57 PM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Barient# 10 winch > > John, the Barient 22s have got my attention. My mkV came with 18s and I find > them slightly under powered when I'm in the "should be putting up the 100" > zone. I happen to have a couple of Barient 10s sitting around that I was > going to add to the cabin top arrangement. One unfortunately has a crack in > the uppermost portion but the other is perfect. They are 1984 black ones of > whatever Dwarfian material they are made of. Let me know what you want for > the 22s. > Are they 2 speed? > > Brent Driedger > C&C 27-V > Frozen Lake Winnipeg. > > Sent from my iPhone > > On Dec 2, 2013, at 7:19 PM, John Russo <johnrussob...@optonline.net> wrote: > > Paul, > > Thanks for the response. The16 is a bit too big for the job and the space > available but I will keep it in mind for any future applications. I will soon > have a couple of Barient 22’s on my hands that I am replacing with Lewmar ST > 40 EVO winches. > > John > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Baker > Sent: Saturday, November 30, 2013 10:57 PM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Barient# 10 winch > > I have a pair of stainless Barient 16 I want to sell, bigger is always better > :) > > > On 13-11-30 05:31 PM, John Russo wrote: > I am looking for a vintage 1984 or later Barient #10 winch to match the > mainsheet winch on my 1984 C&C 32 located on my cabin top port side. I intend > to use the 2nd winch on the starboard cabin top aft of the traveler. I had a > 2nd or 3rd hand Barient #10P there which did not do the job. It is for > multipurpose use to be positioned aft of a Lewmar triple clutch for my main > halyard , outhaul, and Vang. > > The #10 that I have on the Port cabin top measures 4&3/8 at the base and is > 3&3/4 tall. It is greyish-Maroon in color and I assume Aluminum as the 1984 > -32 spec calls that out. I have checked out Ebay and there are some #10’s > listed but none with the above dimensions or AL. > > Any suggestions as to where I can find one? > > Thanks > > John > Arpeggio > Norwalk CT > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
