Disconnect from engine first and see if it is cable or something else. Mine
was so stiff when got boat need two hands and could barely shut off engine at
that. When disconnected cable worked smoothly. Cable hand extra length so
made smooth loops instead of letting it lust take it's own shape and snake
around. Works great now. PO had cable tied it in places which made "hard"
spots. Smooth is good.
Bill Walker.
Sent from my HTC
----- Reply message -----
From: "Robert Gallagher" <trys...@gmail.com>
To: <cnc-list@cnc-list.com>
Subject: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20
Date: Tue, Dec 3, 2013 2:46 PM
My stiff throttle turned out to be the throttle itself needing lubrication.
After disconnecting the cable I sprayed pb blaster on the mechanism and
worked it until it was freed up.
Hope this helps
Rob
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
