Hi,

I had a cable once that was also painfully stiff to a point that I broke the 
handle trying to move it.   It turned out that cable housing was split at a 
point near the middle of the cable which allowed the inner cable to corrode at 
that location.   A new cable and self-manufactured handle fixed it.      You 
may want to check along the cable bends for split cable housings and replace.   
 

On another boat, I once saw a stiff cable caused by an over tight clamp near 
the injector.  It was fixed just by loosening the clamp a bit. 



-
Paul E.
1979 C&C 29 Mk1
S/V Johanna Rose
Carrabelle, FL

On Dec 3, 2013, at 9:07 AM, cnc-list-requ...@cnc-list.com wrote:

> Date: Mon, 2 Dec 2013 22:03:28 -0800
> From: kevindrisc...@gmail.com
> To: cnc-list@cnc-list.com
> Subject: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20    
> on cnc 30 mkII
> 
> 
> (4) - The throttle is painfully stiff to the point I almost need two hands to 
> move it. Is there an easy  lubrication point to get it moving again till I 
> can replace the cable?
> Thanks everybody. 
> Kevin
> 
> s/v Osprey 
> 
> C&C 30 mkII
> Pic from Thanksgiving: 
> https://docs.google.com/file/d/0BwhcX19YaPJ8QWtlbGE2NzhYRzQ/edit?usp=docslist_api
> Sent from my Tablet

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to