WHAT WAS THE LENGTH OF YOUR BOAT BY ANY CHANCE DO YOU HAVE THE COMPANION WAY LADDER?
ZOOMER C&C 40 On Fri, 22 Nov 2013 17:02:39 -0500 "A. F. Cano" <a...@shibaya.lonestar.org> writes: > Hi, > > Some small items that were not on the boat when Sandy took it: > > 2 original C&C ceiling light fixtures (1975 vintage). > 1 stainless steel deck ring with 4 3/8" hole, new, never installed. > (this is what goes over nicro vents) > 1 Nicro vent propeller and some mounting hardware. > 1 mounting ring (4 5/8" ID), my guess is the outside one since it's > slightly discolored (for the nicro vent) > 2 1.5" fittings (Nauta brand) for a Nauta flexible water tank > (new). > 1 5/8" fitting (Nauta brand) for a Nauta flexible water tank (new). > 1 grey plastic bracket (3.5" opening) for a radio or gps unit. > PVC plumbing pieces for a SeaLand holding tank pump, all new. > 90 degree elbow with with 2 hose (1.5") attachments > 90 degree elbow with 2 screw fittings > 2 screw to hose adapters (for 1.5" hose) > 1 adapter: 1.5" hose on one side, 1" hose on the other. > 1 6" grey screw-on deck plate (new) > 15" of 1" radiator hose with a garden hose attachment I used to > flush > the engine. > 2 short pieces (3.5" useable) of sealand 1.5" hose. These were > actually > vibration dampening mounts for the sealand pump (pre-drilled) but > there > is 3.5" of useable hose suitable for, say, connecting fittings. Of > course new and never used. I would never think of offering old > smelly > hose! > > When I think of all the effort I put into upgrading the boat... > Ouch! > > Augustine > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
